If you use the touchscreen without a mouse and keyboard, you will definitely miss the right-click function. The following is written at the end of the file: lcd_rotate=2Īfter the restart, the image should now be rotated by 180 ° and you can turn the display over, which puts the micro USB connector on top.Īlternatively, there are the following options: display_rotate=0 # Normal It only needs to be specified for one file sudo nano /boot/config.txt Luckily, there is the possibility to rotate the picture automatically. So if you do not have a 90 degree USB cable, it will be difficult to set up the display vertically. One point that initially bothered me a bit is that the micro USB entrance for the power supply is on the bottom of the display. In addition, a Raspberry Pi Model 2B or Raspberry Pi 3 should be used, if the display is not powered externally (so only via the GPIOs). What is the coloured dot in the top right corner?Īll of these tips have been tested on Raspbian, but should also run on Jessie or Kodi.Optimal programs and tools for the touchscreen.If you have more points, write a short comment and it will be added □ If you have bought the display recently or are thinking about it, you can read some important points here. The official 7″ Raspberry Pi touchscreen was developed by the Raspberry Pi Foundation and has a large number of options. In order to cover many topics, I have created this article, where some frequently asked questions (FAQ) are summarized. Not only is the very accurate 10-finger capacitive touch a positive, but also no GPIOs or HDMI ports are occupied. The official Raspberry Pi touchscreen module offers many options and makes many other touch displays look old for a similar price.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |